Tag Archives: finished

Cedar Roll Top Desk by Ed- My Windsor Project

The follow project was sent in from an employee at the Windsor Plywood Airdrie store. The author of this blog, contacted the owner, Ed and asked if the work in progress could be posted and shared on the mywindsorproject.com blog. This was Eds reply:

“I am flattered that you would consider this project for inclusion in the blog.  It will be completed within the next couple of weeks.  How ’bout I send you some final pics of the completed interior/exterior and some notes about the project when done.”

We replied saying that would be a bonus. Almost a month went by and we received another email with updated pictures of the finished project. Great job on your project Ed! We all appreciate the reply and the fantastic follow-up.
Look forwards to more projects from your workshop Ed!

“Hello
Attached are some pics of the finished project, the roll top desk.
The wood used is all cedar, much of it purchased from Windsor.  The folks in Windsor Plywood Airdrie were really helpful.  I used cedar plywood, 3/4 inch and 1/4 inch, as well as dimensional cedar lumber planned to desired thicknesses.  It is finished with Varathane clear satin, visible locations sprayed.
I had not seen a roll-top made from cedar and thought that it would be unique.
Now I need a new project!”

42015 050 42015 051 42015 052 42015 053 42015 054 42015 055

Replica Harley Davidson Evolution Engine by Brent – My Windsor Project Contest Entry

(This project was submitted by Brent on May 2nd , 2014)
I would like to submit my plywood project in the woodworking category.

 The plywood (3/4” Baltic birch) was purchased from your Coquitlam store as recommended by your employee Jordan.

 My project was used for my audition in HGTV’s Canada’s Handyman Challenge (Season 3) which I ultimately won.  The criteria for the audition was to make a project (of our choice) from one sheet of ¾” plywood, miscellaneous hardware was allowed.

The project is a full scale replica Harley Davidson Evolution engine.  It is accurate within millimeters of an actual engine and includes a working crankshaft, rod, and piston.  The piston includes rings that were removed from my motorcycle engine (after a recent rebuild) validating the accuracy of this build.  I would like to point out I am a HD Mechanic by trade and not a carpenter, there was a great deal of learning in this project.  The completed project consumed all but 2 square feet shown in the foreground of the photos.  I did not have the engine finished for the audition, I completed it after the competition was over.  I have invested just over 200 hours building this project.

 Regards

 Brent

Finished-EVO-engine-RH-side-700
Above: Finished EVO Engine Right Hand Side

Finished-EVO-engine-LH-side-700
Above: Finished EVO Engine Left Hand Side

ignition-cover700x800
Above: Ignition cover

Finished-EVO-engine-piston-cut-away700x800
Above: Finished EVO Engine Piston Cut Away

Scroll to top