Tag Archives: walnut

Adam’s Walnut Live Edge Coffee Table

Adam is a customer of Windsor Plywood Leduc. He sent in some pics of a coffee table he built from a couple of pieces of Live Edge Walnut.
Finished with a clear epoxy, the end result is gorgeous!! Very well done Adam and thank you for sharing this with us!

#customersproject #loveseeingendresults
#windsorplywoodleduc #walnut #walnutlivedge
#epoxy 
#shoplocalleduc #jobwelldone👏#coffeetable

 

walnut live edge table walnut live edge table with pipe legs

Custom Rocking Chair by Alistair

Hi my name is Alistair, I live in Calgary AB.
Below is a rocking Chair I built from a variety of wood, it is made from walnut, cherry, ash, poplar and spruce most of which was purchased from the south location Windsor Plywood in Calgary.

The chair is 43 ply’s glued up and then carved with chainsaw, angle grinder and chisels then sanded with an orbital sander down to hand sanding to a 400 grit. The finish is a pre-catalysed lacquer that has been sanded between coats and polished.

It was a super fun project and I look forward to making more of these, thanks for all your great products Windsor Plywood!!

You can see my other work at standingdeadwoodworks.com

 

Boston-style Bombe Chest of Drawers

Walnut_Bombe_Dresser2This chest was made from walnut purchased from Windsor Plywood Vernon. Crafted by Bill Ferguson of Salmon Arm.  The Chest of Drawers, which are 19-1/2” x 39” x 33-1/2” took five months to build and finish. Woodwork was done by Bill and the finish, with Bill’s assistance, by Richard G, his next door neighbour. This is the second major project that these neighbours have completed.

Walnut Live Edge Table by Windsor Plywood Lloydminster

Beautiful Fir Slab Coffee table and Computer Desk by Gavin – Customer Project

The following email was sent in from the Windsor Plywood Langley store

Gavin was kind enough to send in some photos of two projects made from the same original Fir live edge slab purchased from Windsor Langley. They look great! The computer desk was fabricated using the cut off from the coffee table project, with some Walnut to brace. Very cool!

original_slabslab_table2slab_table1 slab_table3 computer_desk

Employee Project- Custom-Made Wood Pens

A few of the impressive hardwood and exotic wood pens turned by Lyle, assistant manager at Windsor Plywood Calgary North. Look closely at the metal hardware on the Wenge and the Walnut pens.Lyle Danauer CalgaryN pens1 Lyle-Danauer-CalgaryN-pens2

Walnut Spice Cabinet and Jewelry Box

Walnut Spice box

Walnut Spice Cabinet and Jewelry Box by John Milne – Windsor Plywood Vernon. Made from Walnut shorts. Each box is 19 1/2” high, 16” wide, 11 1/2” deep. Face has been book matched from a solid piece. The back can be removed to access a secret compartment and a slot at top for important papers. Approximately 100 man hours went into this project.

Scroll to top